Boundless ADDS 6700 Manual Page 168
- Page / 177
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
1
/
4
-DIN,
1
/
8
-DIN &
1
/
16
- DIN Controllers & Indicators - Product Manual
59305, Issue 7 – March 2014 Specifications Page 163
Auxiliary Inputs
Input Sampling rate:
4 per second
Input Resolution:
13 bits minimum
Input types:
4 to 20mA, 0 to 20mA, 0 to 10V, 2 to 10V, 0 to 5V, 1 to 5V.
The Full Auxiliary input in Option Slot B also supports 0 to 100mv
and Potentiometer (2KΩ or higher).
Measurement Accuracy
(reference conditions):
0.25% of input span 1 LSD
Input resistance:
Voltage ranges: 47KΩ nominal
Current ranges: 5Ω
Input protection:
Voltage input: will withstand up to 5x input voltage overload without
damage or degradation of performance in either polarity.
Current input: will withstand 5x input current overload in reverse
direction and up to 1A in the normal direction.
Isolation:
Slot A has basic isolation from other inputs and outputs.
Slot B has reinforced isolation from other inputs and outputs.
Sensor Break Detection:
For 4 to 20mA, 2 to 10V and 1 to 5V ranges only.
Digital Inputs
Type:
Voltage-free or TTL-compatible
Voltage-Free Operation:
functions depend on model and how
configured
Connection to contacts of external switch or relay:
Open = SP1, Automatic Mode or Local setpoint
selected. Minimum contact resistance = 5KΩ,
Closed = SP2, Manual Mode, Remote Setpoint
selected, Latching Relay, Stored Min/Max/Time reset
(edge triggered) or Tare activate (edge triggered).
Maximum contact resistance = 50Ω.
TTL levels:
functions depend on model and how
configured
2.0 to 24VDC = SP1, Automatic Mode, Local Setpoint
selected.
–0.6 to 0.8VDC = SP2, Manual Mode, Remote Setpoint
selected, Latching Relay, Stored Min/Max/Time reset
(edge triggered) or Tare activate (edge triggered).
Maximum Input Delay (OFF-ON):
0.25 second.
Maximum Input Delay (ON-OFF):
0.25 second.
Isolation:
Reinforced safety isolation from any source of
hazardous voltages.
- Warranty 5
- Limitations 5
- Contents Page Number: 6
- How to use this manual 14
- 1 Introduction 15
- 2 Installation 16
- 3 Plug-in Options 19
- 4 Wiring Instructions 25
- Use of Shielded Cable 26
- Noise Suppression at Source 26
- Connections and Wiring 28
- 5 Powering Up 40
- Displays 41
- LED Functions 41
- Select Mode 43
- Automatic Tune Mode 44
- Product Information Mode 45
- Lock Code View 47
- RSP value. Constrained 54
- Navigating in Operator Mode 59
- Manual Control Mode 62
- + ; 64
- by Scale Range 65
- Valve Position Clamping 78
- Parameter 86
- Parameter No 86
- Changing Parameter Values 103
- Entry into the Setup Mode 110
- Entry into Operator Mode 114
- Din Indicator Units Display 116
- Alarm Indications 116
- Multi-Point Scaling 117
- Tare Feature 117
- Bit Parameters 118
- Word Parameters 119
- Manually Fine Tuning 125
- Physical Layer 126
- Link Layer 127
- Device Addressing 128
- Supported Modbus Functions 128
- Function Descriptions 128
- Exception Responses 131
- 14 ASCII Communications 132
- Type 1 Message 133
- Type 2 Message 134
- Type 3 Message 134
- Error Response 135
- 15 Calibration Mode 136
- Recalibration Procedure 137
- 16 Appendix 1 – Glossary 138
- Type: General Parameter 139
- Figure 42. Alarm Operation 140
- , default value = 25% 142
- , Default value = 5 144
- . Default value = 5 144
- parameter 145
- ,default value = 147
- , default setting = .. 150
- to in 150
- , default setting = 150
- Type: Controller Parameter 151
- Type: Controller Definition 152
- Type: General Definition 153
- Type: General Parameter 155
- . It is 158
- , default value = 5.0% 158
- Universal Input 165
- DC Linear 167
- Auxiliary Inputs 168
- Digital Inputs 168
- Output Specifications 169
- Control Specifications 171
- Process Alarms 171
- Digital Communications 171
- Reference Conditions 172
- Operating Conditions 172
- Standards 172
- Physical Specifications 173
- Model Type 174
- Input Type 174
- Option Slot 1 174
- Option Slot 2 174
- Packing Options 176
- Special Variants 176
© 2020, manymanuals.com. All rights reserved. | 3.916 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals