Boundless ADDS 6700 Manual download pdf (Page 110)

-DIN,

-DIN &

- DIN Controllers & Indicators - Product Manual

59305, Issue 7 – March 2014 P6010 & P8010 Model Group Page 105

P6010 & P8010 Indicators - Setup Mode

This mode is normally selected only after Configuration Mode has been completed, or is

used when a change to the process set up is required. These parameters must be set as

required before attempting to use the indicator in an application.

Entry into the Setup Mode

Setup Mode is entered from Select Mode

Hold down and press to force the controller into the Select Mode.

The  legend is shown for 1 second, followed by the legend for the current mode.

Press or to navigate to the Setup Mode option, then press .

Note:

Entry into Setup Mode is security-protected by the Setup Mode lock code. Refer to the

Unlock Code section for more details.

Note:

Din indicators have an additional Set LED . This is on in Setup Mode.

Scrolling through Parameters and Values

Press to scroll through the parameters. While this key is pressed, and up to 1

second after, the parameter legend is shown, followed by the current parameter value.

Changing Parameter Values

Press to select the required parameter, then press or to set the value as

required.

Once the displayed value is changed, it is effective is immediately. No confirmation of

the change is required.

Press to move onto the next parameter.

Hold down and press to return to Select Mode.

Note:

If there is no key activity for two minutes the instrument returns to the operator mode.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 176 177

No comments

Boundless ADDS 6700 Manual Page 110